Automatic Fastener Screw and Bolt Packing Machine for Hardware Parts
-
-
-
-
-
Application
This fastener packing machine is designed for screws, bolts, nuts, washers, nails, rivets, furniture fittings, plastic parts and other small hardware components. The feeding and dosing system transfers each portion to the vertical packing unit for automatic bag forming, filling and sealing.
Package Type
Suitable for pillow bags and center back seal bags formed directly from roll film. Different bag dimensions can match small screw packs, bolt and nut packs, hardware accessories and mixed component sets according to the machine configuration.
Workflow
1. Hardware Feeding, 2. Product Dosing, 3. Film Feeding, 4. Bag Forming, 5. Hardware Filling, 6. Vertical Sealing, 7. Horizontal Sealing, 8. Bag Cutting, 9. Finished Bag Output
Features
1. Handles screws, bolts, nuts, washers, nails, rivets and other small hardware parts.
2. Product feeding and dosing system can match different hardware sizes and packing requirements.
3. Vertical packing unit forms, fills, seals and cuts bags directly from roll film.
4. Supports different bag sizes for small fastener packs, hardware accessories and component sets.
5. Bag length and operating settings can be adjusted for different product quantities and dimensions.
6. Suitable for single hardware components or mixed hardware sets when configured with the corresponding dosing system.
7. Can connect with upstream feeding and downstream conveying equipment according to the production setup.
Technical Parameters
| Parameter | Specification |
|---|---|
| Model | BP300 |
| Voltage | AC 100-240V, 50/60Hz |
| Power | 2kW |
| Air Supply | 0.4-0.6MPa |
| Weight | 200kg |
| Pouch Style | Back Seal Bag / 3-Side Seal Bag / 4-Side Seal Bag |
| Packing Speed | 1-50 bags/min |
| Counting Quantity | 1-20 pcs/bag |
| Pouch Size | W: 40-140mm, L: 50-180mm |
| Max Film Width | 300mm |
| Applicable Film | CPP, OPP, PE, Laminated Film |
FAQ
What hardware products can this machine pack?
It can pack screws, bolts, nuts, washers, nails, rivets, furniture fittings, plastic parts and other small hardware components.
Does the machine count or weigh the hardware parts?
The dosing system can be configured according to the product and packing requirement. Counting systems suit piece-count packs, while weighing systems suit weight-based hardware packs.
What bag types can the machine produce?
The packing section uses roll film to form pillow bags and center back seal bags.
Can the machine pack different screw and bolt sizes?
Yes. The feeding, dosing and bag settings can be configured according to the actual hardware dimensions and packing requirements.
Can several hardware parts go into one bag?
Yes. Multiple hardware components can be packed together when the machine uses the required feeding or dosing configuration for each component.
What is the maximum packing speed?
The machine can reach up to 50 bags/min. Actual output depends on hardware size, quantity or weight per bag, feeding method and bag dimensions.
